-40%
Dynojet 37-003 Power Commander V

Dynojet 37-003 Power Commander V

$ 232.31

Availability: 100 in stock
  • Returns Accepted: Returns Accepted
  • Item must be returned within: 14 Days
  • Brand: Dynojet Research
  • Manufacturer Part Number: 37-003
  • Disclaimer: Item may not be exactly as pictured.
  • MPN: 37003
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Warranty: No Warranty
  • Restocking Fee: No
  • Condition: New

    Description

    Dynojet 37-003 Power Commander V
    Fuel control for each individual cylinder in a smaller enclosure
    "Warm-up" fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
    Reduced size from the PCIII USB
    Easy to install
    USB powered from computer; 9 volt adapter is no longer needed
    Two-position map-switching function built in
    Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
    Gear/speed input allows for map adjustment based on gear
    Analog input allows user to install any 0-5 volt sensor
    Build an adjustment table based on analog input such as boost or temperature
    Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
    More tuning ranges than PCIII USB
    Enhanced "accel pump" utility
    For Offroad and ATV, see appropriate catalog under Moose Power Commanders
    Made in the U.S.A.
    SECONDARY FUEL MODULE
    The "basic" mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time
    Allows for the adjustment of all eight-injectors
    Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
    You can also map each injector separately, giving you up to 48 complete maps
    Adjusts both upper and lower injectors by as much as +250/-100%
    If gear position input is connected to your PCV, you can adjust all of the injectors on a "per gear" basis
    Single cable connection to the PCV
    The "basic" mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately
    Connects to the upper injector rail using OEM connectors
    See application chart for availability
    QUICK SHIFTER EXPANSION MODULE
    The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
    Once the sensor is attached you will have full Quick Shifter functionality
    The QEM connects to the upper injectors and then into the PCV